ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
1 | initial version |
I found the following answer, which solves this problem:
yp7y-stu commented on 13 Dec 2020 posted:
I had taken 1 day to solve this problem. My mistake was that I didn't git under ~/catkin_ws/src. The correct build meshod is described below.
$ mkdir ~/catkin_ws $ mkdir ~/catkin_ws/src $ cd ~/catkin_ws/src $ git clone https://github.com/slamtech/rplidar_ros $ cd ~/catkin_ws $ ls -l /dev/ttyUSB0 $ sudo chmod 666 /dev/ttyUSB0 $ catkin_make rplidarNode $ source ~/catkin_ws/devel/setup.bash $ roslaunch rplidar_ros view_rplidar.launch
2 | No.2 Revision |
I found the following answer, which solves this problem:
yp7y-stu commented on 13 Dec 2020 posted:
I had taken 1 day to solve this problem. My mistake was that I didn't git under ~/catkin_ws/src. The correct build meshod is described below.
$ mkdir ~/catkin_ws $ mkdir ~/catkin_ws/src $ cd ~/catkin_ws/src $ git clone https://github.com/slamtech/rplidar_ros $ cd ~/catkin_ws $ ls -l /dev/ttyUSB0 $ sudo chmod 666 /dev/ttyUSB0 $ catkin_make rplidarNode $ source ~/catkin_ws/devel/setup.bash $ roslaunch rplidar_ros view_rplidar.launch
3 | No.3 Revision |
I found the following answer, which solves this problem:
yp7y-stu commented on 13 Dec 2020 posted:
I had taken 1 day to solve this problem.
problem.
My mistake was that I didn't git under ~/catkin_ws/src.
~/catkin_ws/src.
The correct build meshod method is described below.below:
$ mkdir ~/catkin_ws $ mkdir ~/catkin_ws/src $ cd ~/catkin_ws/src $ git clone https://github.com/slamtech/rplidar_ros $ cd ~/catkin_ws $ ls -l /dev/ttyUSB0 $ sudo chmod 666 /dev/ttyUSB0 $ catkin_make rplidarNode $ source ~/catkin_ws/devel/setup.bash $ roslaunch rplidar_ros view_rplidar.launch
4 | No.4 Revision |
I found the following answer, which solves this problem:
yp7y-stu commented on 13 Dec 2020 posted:
I had taken 1 day to solve this problem.
My mistake was that I didn't git under ~/catkin_ws/src.~/catkin_ws/src
.
The correct build method is described below:
$ mkdir ~/catkin_ws
$ mkdir ~/catkin_ws/src
$ cd ~/catkin_ws/src
$ git clone https://github.com/slamtech/rplidar_ros
$ cd ~/catkin_ws
$ ls -l /dev/ttyUSB0
$ sudo chmod 666 /dev/ttyUSB0
$ catkin_make rplidarNode
$ source ~/catkin_ws/devel/setup.bash
$ roslaunch rplidar_ros