ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
![]() | 1 | initial version |
hello,
I C the Q is approx a month old, hope u have figured it out.
I was following the same tutorial, but for simulation (later I saw http://www.ros.org/wiki/turtlebot_simulator/Tutorials/Building%20a%20Map%20in%20TurtleBot%20Simulator),
But everything was exactly same except one parameter missing in tutlebot_gazebo/launch/robot.launch
I only needed to add :
<param name="output_frame" value="odom"/>
in the odometry estimator i.e., in the tag:-
<node pkg="robot_pose_ekf" type="robot_pose_ekf" name="robot_pose_ekf">
so now this node, in robot.launch looks like:-
<!-- The odometry estimator -->
<node pkg="robot_pose_ekf" type="robot_pose_ekf" name="robot_pose_ekf">
<param name="freq" value="30.0"/>
<param name="sensor_timeout" value="1.0"/>
<param name="publish_tf" value="true"/>
<param name="odom_used" value="true"/>
<param name="imu_used" value="false"/>
<param name="vo_used" value="false"/>
<param name="output_frame" value="odom"/> <!-- This is not present in tutrtlebot_gazebo's robot.launch -->
</node>
Only with this modification I am now able to make the map correctly.
Hope it helps.