Pr2 whirling like a dervish

asked 2011-10-11 04:01:49 -0600

Lorenzo Riano
1342 ●26 ●34 ●50 http://www.eecs.berkel...

updated 2014-11-22 17:05:32 -0600

ngrennan
1 ●1 ●1

When using the pr2_2dnav_local and setting a goal very close to an obstacle, the robot starts rotating in place. My guess is that this is related to the dynamic window controller, which can't find a suitable set of commands, even if the planner says the goal target is in a free cell. I've read the guide here, but I didn't find anything to solve this problem.

What parameters of the dwc should I change to avoid this effect?

A broader question is, would you use the default navigation stack to get close to an object (say a table) or do I need a custom package for that?

edit retag flag offensive close merge delete

Comments

I don't have a solution, but this is a failure mode I've experienced myself, as have several others. At least you aren't alone!

Mac ( 2011-10-11 05:59:49 -0600 )edit

Several whirling robotic dervishes then!

Lorenzo Riano ( 2011-10-11 06:12:36 -0600 )edit

Thumbs up for the question title! :-)

Martin Günther ( 2011-10-11 21:34:50 -0600 )edit

thanks :-D

Lorenzo Riano ( 2011-10-12 03:33:38 -0600 )edit

add a comment

3

answered 2011-10-11 07:01:00 -0600

watts
584 ●2 ●7 ●10

Lorenzo, you should try the "base_local_planner", which was default until cturtle. It does not have this spinning problem at all. The DWA local planner can be fun to watch, but you might be bored of this spinning behavior.

The default configuration file in pr2_navigation_config/move_base/base_local_planner_params.yaml will work well, but if you add the parameter "min_vel_x" to "0.10", the planner will be slightly more robust.

edit flag offensive delete link

Comments

base_local_planner solves the problem. in that the robot reaches the point. but then it get's stuck and it doesn't move anymore, even if it has reached a goal position. I guess there is still some fine tuning to do, but things are getting better.

Lorenzo Riano ( 2011-10-12 03:07:24 -0600 )edit

Hi Lorenzo, did you solve the problem? We got the same here in Freiburg. If the robot gets too close to obstacles on the way or at the goal it does not finish rotating and does not continue the path. I have played around with the move_base parameters but was not able to fix it.