differences in simulation from gazebo and Matlab
Dear,
I have a simple urdf model and have tried to control the model using some nonlinear controller. To verify the controller, I tested it in Matlab simulation.
The designed controller worked well in the Matlab environment, but the c++ coded controller has not worked in gazebo. So I made open loop test both in ROS and Matlab, for example, applied unit force and moment to the model and checked the outputs of positions and velocities. The values from the gazebo simulation is far smaller than those from Matlab. What should I modify or check in gazebo simulation ?
I checked mass properties, put viscous damping (modeled using feedback velocity), used the time from ros::Time::now().toSec().
Is this problem related to time in gazebo?
Comments
Hi Maruchi, can you post instructions on how to reproduce the results? thanks. John
hsu
(
2012-01-23 05:51:36 -0600
)edit
If you mean reproducing in matlab, I made a model and designed a controller in matlab/simulink. To verify that the model in matlab/simulink is same as the model in gazebo, I did open loop test such as step response test and see those responses are same each other.
maruchi
(
2012-01-23 12:02:37 -0600
)editadd a comment
