ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange
Ask Your Question
1

nao bringup error

asked 2015-07-07 13:05:03 -0600

jlzizmor gravatar image

updated 2015-07-08 08:22:15 -0600

I'm just getting started with a nao, and i'm getting an error when I try and run the bringup launch. I've been following the nao tutorials for ros and the install went fine. When I got to the getting started tutorial the code, the following line produces an error :

roslaunch nao_bringup nao_full.launch

error:

[I] 6927 qimessaging.transportserver: TransportServer will listen on: tcp://192.168.1.126:39105
[W] 7063 qimessaging.transportsocket: resolve: Host not found (authoritative)
[ERROR] [WallTime: 1436292007.715455] Could not create Proxy to "ALVideoDevice". 
Exception message:
    ALBroker::createBroker
    Cannot connect to tcp://<192.168.1.127>:9559
[INFO] [WallTime: 1436292007.751839] Stopping naoqi_camera
[INFO] [WallTime: 1436292007.752147] naoqi_camera stopped
[I] 6911 qimessaging.session: Session listener created on tcp://0.0.0.0:0
[I] 6911 qimessaging.transportserver: TransportServer will listen on: tcp://127.0.0.1:42822
[I] 6911 qimessaging.transportserver: TransportServer will listen on: tcp://192.168.1.126:42822
[W] 7076 qimessaging.transportsocket: resolve: Host not found (authoritative)
[ERROR] [WallTime: 1436292007.801604] Could not create Proxy to "ALVideoDevice". 
Exception message:
    ALBroker::createBroker
    Cannot connect to tcp://<192.168.1.127>:9559
[INFO] [WallTime: 1436292007.879432] Stopping naoqi_camera
[INFO] [WallTime: 1436292007.880013] naoqi_camera stopped
shutting down processing monitor...
... shutting down processing monitor complete
done

This is with roscore running. I've also tried this with and without running naoqi first. Both my computer and the nao are on the same network. In the Choregraphe program, the nao is also not visible.

EDIT JULY 6, 2015

I got Choregraphe to connect to my Nao by downloading a different version, version 1.14.5 instead of the latest build.

edit retag flag offensive close merge delete

2 Answers

Sort by ยป oldest newest most voted
0

answered 2015-07-16 11:33:48 -0600

Karsten gravatar image

For me, this seems as if you try to connect to the wrong IP. Can you verify that your NAO_IP is set to the correct IP of your robot? when in doubt, start your program like this:

NAO_IP=<ip_of_your_robot> roslaunch nao_bringup nao_full.launch

Then further, please check that naoqi is running successfully on your robot. If not, the bridge can't connect to it. You can check also by opening choregraphe and see if the camera is working fine.

edit flag offensive delete link more
0

answered 2016-04-19 10:51:08 -0600

Pourya gravatar image

Hi How can I connect to webots or gazebo by ROS? How can I address nao_bringup by port?

edit flag offensive delete link more

Question Tools

1 follower

Stats

Asked: 2015-07-07 13:05:03 -0600

Seen: 1,208 times

Last updated: Apr 19 '16