Access to modbus internal IO on UR driver
Hi everyone, Is it possible with the two ur packages to access to the internal IO ? You can access to the physical IO.
Thomas
ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
Hi everyone, Is it possible with the two ur packages to access to the internal IO ? You can access to the physical IO.
Thomas
Is it possible with the two ur packages to access to the internal IO ?
If you are referring to ur_modern_driver
and ur_driver
, then there is currently no support for accessing any IO elements apart from the standard ones (ie: tool and standard analogue and digital).
Accessing modbus words is not supported.
Yes, I was referring them. Nobody knows a fork that could do the trick before developing ?
Asked: 2018-07-23 03:38:34 -0500
Seen: 315 times
Last updated: Jul 23 '18
Universal Robots - joint speed control
Best Practices in ROS. (Making FRC->ROS Tutorial)
Using a single node to process 2 input image files [closed]
robot_localization: imu0 type error
Problem with CMAKE_CXX_COMPILER
Parameter limits in ros2 galactic?
Velodyne VLP32-C scaling issue
how to install ros indigo on Intel Edison
Can you clarify what you mean by "internal IO" specifically? I'm unfamiliar with that name wrt UR robots. Are you referring to the safety IO, modbus registers, flags or something else?
Also: which controller and which version of Polyscope?
Are you referring to the IO ports on the end effector of the arm? Can you tell us which version of the UR driver you're currently using, there are a few out there.
I have to access to 7 words of 16 bits as input and same for the output on the modbus registers. Polyscope 3.5 Controller 3.5.1.10661
For future questions: please include that sort of (version) info in your question text.