Display in RViz the collision geometry tag of an URDF link
Is it possible to display in RViz the collision geometry tag (box, sphere, cylinder etc.) of an URDF link tag?
ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
Is it possible to display in RViz the collision geometry tag (box, sphere, cylinder etc.) of an URDF link tag?
Yes, if you add a RobotModel display in rviz and expand its options in the Displays panel, you should see a checkbox for "Collision Enabled". If you check it, you can see the collision models for your robot that were read from the URDF. A nice example of that can be found here.
Asked: 2019-07-31 14:42:24 -0500
Seen: 992 times
Last updated: Sep 26 '21
Visualizing continuous and revolute joint types in rviz
How to add Kinect sensor input to a URDF model?
Has there been progress for URDF transform jitter in RVIZ?
pioneer 3dx simulation using rviz and stage
How to link odometry to a URDF model ?
Using XACRO for Generating URDF Files
How to visualize surface normals as Marker::Arrow for each point in rviz?