| ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
Hi, my question is,
Is there a way to make robot avoid collision with another robot in the same map using SLAM gmapping (so the map is not completed), but in the same situation this other robot is smaller and only Lidar is used? A goal is to detect the other robot as an obstacle without using sensor data.
Could you compare the robots positions in a node and calculate the proximity between them? If they are too close have one go to its last position and then let the other proceed.
Agreed, I would have a variable storing the last goal the robot was sent to and then republish it if you have one of these scenarios. It may take some digging into the move base code to accomplish that, but I have done similar things before and it is certainly possible. I imagine there are quite a few cases your going to need to consider to make this scheme reliable but you can do it! Let me know how it goes.
@MarosROS@LukeBowersox were you able to get Multi-robot SLAM collision avoidance to work? I am also using gmapping slam with 3 turtlebot3s and while they are running independent gmapping slam nodes, due to their relative motion, the slam map becomes inaccurate when the robots are moving near each other. I understand this is because gmapping slam uses the static world assumption (i.e. moving objects are not modeled in any way) so I am wondering
Asked: 2020-04-01 06:44:56 -0600
Seen: 361 times
Last updated: Apr 01 '20
ROS Answers is licensed under Creative Commons Attribution 3.0 Content on this site is licensed under a Creative Commons Attribution Share Alike 3.0 license.
