ROS2 : SDF to URDF
This question gets asked a lot. But no clear answer on a ROS2 solution it seems.
Is there any ROS2 tool to convert a sdf into a urdf ?
ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
Not quite an answer to the question, but in ROS 2 Rolling (which eventually will become Galactic) the package sdformat_urdf
allows one to use SDFormat instead of URDF for a robot description in ROS (with some limitations): https://github.com/ros/sdformat_urdf . There are some examples here: https://github.com/sloretz/drake_ros2... (the examples also use Drake, but Drake isn't a requirement of sdformat_urdf).
There's a tool at https://github.com/andreasBihlmaier/p... to do the conversion.
Asked: 2020-12-03 16:14:36 -0500
Seen: 1,471 times
Last updated: Aug 09 '23
Controller manager not available in ROS2
URDF alternative of SDF revolute2 joint type
rclcpp::WaitSet vs rclc executor?
Problem spawning in Gazebo a simple URDF model
ultrasonic sensor does not match with URDF
ROS2 NAV2 map not served - help requested
[ROS2][Nav2] Is there a way to expand the global costmap ?
ROS2 rviz2 dockable panel plugin