| ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
ROS passes around images in its own sensor_msgs/image message format. But it is 8bit data. So I wiil want to use images in conhunction with OpenCV. CvBridge is a ROS library that provides an interface between ROS and OpenCV. Maybe Using cv_bridge is 32bit data. Dose from 8bit to 32bit make loss accuracy?
ROS Image messages are not necessarily 8-bit data; the Image message supports a variety of encodings. (Note that the message uses an array of 8-bit values to store a binary blob; that doesn't mean it's 8-bit data.)
Unless you specifically tell it not to, cv_bridge will respect the type of the Image message it's operating on, and the resulting cv::Mat will match.
See the documentation on image_transport and cv_bridge for more.
I appreciate it. I read answers and look here(http://www.ros.org/wiki/cv_bridge/Tutorials/UsingCvBridgeToConvertBetweenROSImagesAndOpenCVImages)
There is "ROS passes around images in its own sensor_msgs/Image message format."
But "sensor_msgs/Image message format" has uint8[] data.(http://ros.org/doc/api/sensor_msgs/html/msg/Image.html)
Is it wrong? I know depth data is 11bit data. I think "sensor_msgs/Image" is encoded and it loss some information.
It convert ROS image to OpenCV image.
Loss image converted also has loss information. Is it right?
So I want to get 11bit raw datas. What can I do?
Asked: 2012-08-30 12:59:18 -0600
Seen: 637 times
Last updated: Sep 04 '12
ROS Answers is licensed under Creative Commons Attribution 3.0 Content on this site is licensed under a Creative Commons Attribution Share Alike 3.0 license.
