| ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
Under hydro, you can use the following:
Both packages end up using rgbd_launch for shared functionality (such as loading image_proc and depth_proc nodelets), so it is somewhat easier to switch between the two drivers as they support similar parameters and topic names.
openni2_camera and openni2_launch have been released. Currently they are only available on the shadow-fixed repository. The next sync should make them available on the public repo as well.
Hi Everybody, as this is "the thread" for OpenNI 2, I would like to let you know of a procedure to make it work with Ubuntu and kinects. Here is the procedure :
1) Install Ubuntu 12.10 (the version 13.04 doesn't work with kinects)
2) sudo apt-get install freenect
3) Download and install OpenNI 2.2 :
cd OpenNI-2.2/
sudo ./install.h
4) Download and install NITE 2.2 :
cd Nite-2.2/
sudo ./install.h
5) Download Driver FreenectDriver
<a href="https://github.com/piedar/OpenNI2-FreenectDriver">https://github.com/piedar/OpenNI2-FreenectDriver</a>
6) Build driver
./waf configure build
7) Copy .so files (build/libFreenectDriver.so ), and paste it in :
OpenNI-2.2/Redist/OpenNI2/Drivers
OpenNI-2.2/Samples/Bin/OpenNI2/Drivers
Nite-2.2/Samples/Bin/OpenNI2/Drivers
Have a good day everybody !
Did the driver and launchers in the ROS freenect stack (https://github.com/ros-drivers/freenect_stack) not work for you?
Good question. in fact, we didn't try/search, as OpenNI 2 was not (yet) supported in ROS, we tried to see if it was possible to have OpenNI 2.2 working with kinect and Ubuntu, without ROS. But it's good to see some packages exist !
Is there a Kinect driver available for OpenNI2 which works under Ubuntu? As far as I had read from their forums they only support the Kinect under Windows with the official SDK. Perhaps some third party driver is available, I'm not sure, but without this it seems less useful.
On a side note, I am using OpenNI2 at the moment with an Xtion on OSX (and is also tested on Ubuntu) and it is working fine. I am using my own code to publish the data, it is not much different from OpenNI 1.0, the API is a lot better though in my opinion.
Asked: 2013-03-03 23:32:27 -0600
Seen: 2,623 times
Last updated: Sep 20 '13
ROS Answers is licensed under Creative Commons Attribution 3.0 Content on this site is licensed under a Creative Commons Attribution Share Alike 3.0 license.
Hey! I'd like to update this question, as I'm also interested if working with Openni 2.0 and ROS will be soon possible?
I'm also interested on this