ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange

Attention: Answers.ros.org is deprecated as of August the 11th, 2023. Please visit robotics.stackexchange.com to ask a new question. This site will remain online in read-only mode during the transition and into the foreseeable future. Selected questions and answers have been migrated, and redirects have been put in place to direct users to the corresponding questions on Robotics Stack Exchange. Additional details are available here.

0

robotis.launch trouble finding AX 12 dynamixel motors

usb2dynamixel

asked 2013-03-12 04:27:08 -0600

Rizqa
45 ●16 ●18 ●21

updated 2013-03-12 04:30:28 -0600

Hello...

I am trying to run pi_tracker.. But,when I use "roslaunch pi_tracker robotis.launch" I encounter none of the motors are detected..

I have tried to detected the motors using the dynamixel_motor package and can successfully detect and identify motors.

Currently I am connecting 3 motors(id 1, 6, 7). The usb2dynamixel is currently set to TTL..

How could this problem solved ?

Thank you...

Installed: ubuntu 11.10 x32 electric pi_tracker pyserial

dynamixel_motors:

[INFO] [WallTime: 1363075666.690905] Pinging motor IDs 1 through 25... [INFO] [WallTime: 1363075667.065507] Found motors with IDs: [1, 6, 7]. [INFO] [WallTime: 1363075667.225608] There are 3 AX-12+ servos connected [INFO] [WallTime: 1363075667.226162] Dynamixel Manager on port /dev/ttyUSB0 initialized

pi_tracker:

RuntimeError: lib_robotis: Error encountered. Could not find ID (1) on bus (/dev/ttyUSB0), or USB2Dynamixel 3-way switch in wrong position.

edit retag flag offensive close merge delete

1 Answer

Sort by » oldest newest most voted

1

answered 2013-03-12 17:15:47 -0600

Pi Robot
4046 ●134 ●158 ●192 http://www.pirobot.org/

updated 2013-03-13 03:17:44 -0600

If you are using the current version of the robotis package from here, then it appears that it is no longer reading ROS parameters to set the baudrate and port. The defaults are 57600 for baudrate and /dev/ttyUSB0 for the port. You probably need to change the baudrate to 1000000 which you can do by editing the lib_robotis.py file:

$ roscd robotis/src/robotis

Then edit the file lib_robotis.py and change the baud rate to 1000000. This worked for me.

--patrick

edit flag offensive delete link

Comments

Thanks.. it works fine.. :)

Rizqa ( 2013-03-12 20:19:02 -0600 )edit

Question Tools

1 follower

Stats

Asked: 2013-03-12 04:27:08 -0600

Seen: 682 times

Last updated: Mar 13 '13

Related questions

ROS Answers is licensed under Creative Commons Attribution 3.0 Content on this site is licensed under a Creative Commons Attribution Share Alike 3.0 license.

Powered by Askbot version 0.10.2