ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
![]() | 1 | initial version |
robot_pose_ekf produces a PoseWithCovarianceStamped message. This is due to the fact that robot_pose_ekf does not include linear or angular velocities in its state estimate; it only estimates the pose (x, y, z, roll, pitch, yaw) of the robot. You should change your callbacks to accept PoseWithCovarianceStamped messages.
If you need an Odometry message, though, I would encourage you to try the robot_localization package.