| ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
Hi,
When I run the openni_camera node and try to see the image through a lan networks i keep seeing it as pictures not as video. I mean that it is relly slow. I think that maight be because the openni_manager launches a lot of topics.
In my case I don't want most of those topics, I just want the image. Is there any option to launch only the image, or only the parts that I want. For exemple the image and the depth frame?
Thanks!
The OpenNI driver only publishes on topics that have subscribers. You don't pay for what you don't use.
It sounds like your network can't handle all the data, and many image messages are getting dropped. This is common when using wifi. You can test this by running
rostopic hz /camera/rgb/image_raw
on both the computer hooked up to the Kinect and your cross-network machine. The computer hosting the Kinect should see ~30 messages/second, while the other may see less if the network is inadequate.
If bandwidth is the limiting factor, it may help to use compressed versions of the image topics. See if you get better results from
rosrun image_view image_view image:=/camera/rgb/image_raw theora
which will compress the image stream through the Theora codec (note: you must have the image_transport_plugins stack installed on both ends). See image_transport for details.
Asked: 2011-12-02 00:28:21 -0600
Seen: 597 times
Last updated: Dec 02 '11
ROS Answers is licensed under Creative Commons Attribution 3.0 Content on this site is licensed under a Creative Commons Attribution Share Alike 3.0 license.