| ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
Hi
Has Anyone tested rviz in NVIDIA Jetson Board?
We are looking the most lightweight and compact hardware that allows run rviz in a properly way.
We have focused in this hardware, which has a NVIDIA GPU, because I have read threads here that it suggests the use of NVIDIA GPU to avoid problems with rviz.
Best regard.
We've got rviz running on a Jetson TK1, but found issues with the version of libpcre (which libogre depends on) that Ubuntu Trusty ships with. We ended up installing libpcre 1:8.35 from Utopic.
I did not explicitly required rviz on Jetson, I mitigated the problem by running rviz on my laptop and communicated between my laptop and jetson over ethernet/internet. That is, Jetson acts as a master computer which runs ROS and you can connect as many computers you want over the same network and all the nodes will be talking to each other.
rviz segmentaiton fault in jetson board,
I have solved it by following these steps
$ sudo apt-get remove ros-indigo-robot-model $ cd ~/catkin_ws/src $ git clone https://github.com/ros/robot_model.git $ cd ~/catkin_ws $ catkin_make $ source devel/setup.bash
Its working fine..
Asked: 2015-04-01 02:41:18 -0600
Seen: 828 times
Last updated: Sep 28 '15
ROS Answers is licensed under Creative Commons Attribution 3.0 Content on this site is licensed under a Creative Commons Attribution Share Alike 3.0 license.
Did you solve the issue I am having the same problem? Seg Fault
Hi jaghvi,
In fact we don´t have the board. We were waiting any user experience about this one.
I see that you have some problems. If you fix the problem please let me know.
Best regards
@jaghvi: if you need help, please ask a new question instead of posting an answer.