| ROS Resources: Documentation | Support | Discussion Forum | Index | Service Status | ros @ Robotics Stack Exchange |
ROS despite its name is not really an operating system, it is more like a middle-ware that facilitates controlling your robot and it works on top of Ubuntu or any other Linux distribution. I believe there is already builds of ROS that you can install directly on your Raspberry Pi, as if you were to install any other software on your board, you can find a tutorial here. And ROS is implemented in Python as well, if you do the ROS tutorials you will see that the rospy library offers access to all ROS functionalities from Python.
If you use a raspberry pi 2, you can use Ubuntu Snappy, which is a version of Ubuntu for Arm architecture. You can get it here:
https://wiki.ubuntu.com/ARM/RaspberryPi
Make sure you do the partitioning under the usage section, as it will give you a full sized SD card. To install ROS, I followed the instructions here, and it worked out well:
http://wiki.ros.org/indigo/Installati...
This worked just fine for me, I was able to use ROS without a problem, I even compiled OpenCV in about 2 or so hours!
ROS is a so called meta-operating system, this means that it's not an OS itself, it need an OS like Ubuntu to run. Beside that, the two main languages supported by ROS are C++ and python.
ROS has a nice Python interface (rospy). You can use ROS on Raspberry Pi / Rasbian. I'd recommend the RPI-2 - the RPI-1 will be very limited due to memory and low CPU power (you might want to consider the ODROID-C1 RPI clone as well since it is same price and faster). Not all ROS packages are available for the ARM processors. For more info, see here:
.
Asked: 2015-06-17 06:09:26 -0600
Seen: 1,238 times
Last updated: Jun 17 '15
ROS Answers is licensed under Creative Commons Attribution 3.0 Content on this site is licensed under a Creative Commons Attribution Share Alike 3.0 license.
